Trex Protect Joist Protection Tape

Description

Trex Protect Joist Protection Roll

Why Trex Protect?

• Protects the top of the joist, rim joist, and ledger board from developing rot and timber decay
• Butyl-based tape helps deck screws hold longer and stronger than acrylic or asphalt-based tape
• Acts as a barrier between timber and galvanized metal such as joist hangers
• Seals deck fasteners and prevents moisture penetration
• Eliminates splitting from freeze and thaw
• Available in two widths 50 mm x 20 m for joists and 100 mm x 20 m for bearers
• Provides a non-skid surface making it safer during installation
• Backed by a 20-year warranty

Trex Protect Joist Tape is easy to install in 3 simple steps.

1. Clean the joist surface making sure it is dry and free of debris
2. Remove the butyl tape backing while applying directly to the surface. Run your hand over the tape and firmly press it onto the joists and bearers.
3. After covering all horizontal and vertical surfaces, cut the tape to length with a utility knife or scissors.

Q1. What size is the Trex Protect Joist Tape?

There is a multiple size options for you to select from on our website.

1. 50mm wide x 20m roll
2. 100mm wide x 20m roll

Q2. How do I install Trex Protect Joist Tape?

Please review the Australian Trex Protect Installation Guide on the following link

Trex Protect Joist Tape Installation Guide